|
LakeAir Filters, Cleaning Solutions and Accessories
|
|
|
Profiler Screens and Carbon Filters |
Media Filters
|
|
|
|
|
Cleaning Solution |
Wall Mounting Brackets - Portable
|
Wall Mounting Brackets - Commercial |
HEPA LAFC Media Pad with Integrated Carbon Filter |
 |
Our HEPA LAFC model ceiling mounted air cleaner offers true air purification. Keep your machine running smoothly and efficiently by replacing the filter every 6 - 9months depending on the dust load. A dirty filter will cause undue strain on the model HEPA LAFC blower motors and will not clean your room air as effectively as a new filter.
Filter size: 20 1/4 x 16 x 4".
|
Media-1 Replacement Filters
|
Media-1 filters are the perfect inexpensive upgrade from ordinary fiberglass filters. The slim design of the Media-1 unit allows installation in even the tightest spots. Replace filter every 6-12 months depending on dust load. Filter sizes: #20071 (Media1-1814) 16x 20 x 4 1/4", #20072 (Media1-2214) 16 x 25 x 4 1/4"
-
Perfect intermediate step-up from fiberglass filters
-
98% efficient on particles 6 microns or larger, 80 - 90% efficient on 4 micron size
-
Pre-built media requires no installation - just slide it into the case!
-
Replace every 3 - 4 months depending on dirt load
|
#20086 Replacement media for M-18 |
#20087 Replacement media for M-22 |
#20071 Replacement media for M1-1814 |
#20072 Replacement media for M1-2214 |
Replacement Carbon Afterfilter and Aluminum Prefilters |
 |
Odor controlling Carbon after filters are the logical addition to any air purification system, combining odor control with particulate control. Carbon filters help control the odors from cigarette smoke, printing processes and much more. Carbon filters will generally need replacement every 3 - 4 months, depending on the pollutants in the air. Replacement numbers and sizes for every LakeAir model are listed below. If you have a Master Appliance air cleaner, please call us at 1-262-632-1229 for parts availability. |
| Model |
Part Number |
Size |
Replacement Schedule
Time Frame is Approximate |
Shipping Weight |
| Excel |
#499027 |
16" x 6¼" x ½" |
Every 1-3 months |
1 lb. |
| Maxum |
#499005 Carbon After Filter |
16" x 11½" x ½" |
Every 1-3 months |
1 lb.
|
| Maxum |
#499024Granulated Carbon After Filter |
16" x 12" x 1" |
Every 3-6 months |
3 lbs. |
Go
to Excel and Maxum Units Page |
LA-1400S &
LA-2000S |
#499072 |
16" x 19½" x 3/8" |
Every 1-3 months |
2 lbs. |
LA-1400 &
LA-2000 |
#499023 |
18" x 19½" x ½" |
Every 1-3 months |
2 lbs. |
| |
|
|
|
|
Go
to LA-1400 and LA-2000S Units Page |
| LAFC |
#499072 |
16" x 19½" x 3/8" |
Every 1-3 months |
2 lbs. |
Go
to LAFC Units Page |
| LAD-1814 |
#499090 |
16 15/16" x 20 3/4" x 3/8" |
Every 1-3 months |
2 lbs. |
| LAD-2214 |
#499073 |
16" x 23" x 3/8" |
Every 1-3 months |
2 lbs. |
Go
to LAD In-duct Models Page |
| Aluminum Prefilter Screens |
| Our prefilter screens capture the larger particles before they get to the electronic filter cell or HEPA media pad, keeping the high efficiency filters cleaner, longer. Prefilters can be washed and re-used for years and do not need to be replaced until either damaged or show signs of excessive wear from years of cleaning. Please choose the correct size for your unit from the chart below: |
LA-99 Concentrated Cell Cleaning Solution |
|
LA-99 is a one gallon concentrated cell cleaning solution which works especially well on tough, greasy particulate soiled cells coated with tobacco tar, nicotine, cooking grease in restaurants and similar hard to remove contaminants. LA-99 should be diluted one part solution to 5 - 10 parts water. May be sprayed onto cells or soaked in solution. Cleans tough dirt in less than 15 minutes. Read all directions carefully before use.
-
One gallon concentrate makes up to 10 gallons!
-
Removes tough contaminants like cigarette tar and nicotine.
-
Useful for a variety of tough cleaning chores.
|
| Wall Mounting Bracket - Portable |
|
The LakeAir Wall mounting bracket is available for either the Excel or Maxum portable air cleaners. This accessory allows you to mount the unit above the breathing area, which is ideal for airborne particles that rise, such as smoke. It also allows for more space in the room by keeping off of the table or other such furniture.
-
Mounts easily to wall stud
-
This great space saver keeps the unit from being obtrusive
-
Great for home or office use
-
Keeps your air cleaner elevated at "breathing level"
|
Wall Mounting Bracket part# 10007 |
| Wall Mounting Bracket - Commercial |
 |
The LakeAir Wall mounting bracket is compatible with either the LA-1400 or LA-2000S air cleaners. This accessory allows you to mount the unit above the breathing area and off to the side, which is ideal for airborne articles that rise, such as smoke. It also allows for more space in the room by keeping off of the table or other such furniture.
-
Mounts easily to wall stud
-
This great space saver keeps the unit from being obtrusive.
-
Ideal for behind bars or countertops, or hung above a booth.
-
Keeps your air cleaner elevated at "breathing level".
|
Wall Mounting Bracket part# 10009 |
|
|
