LA2000 Odor Control.
The LA2000-oc is the best air purifier for odors. It uses a 10lb Activated Carbon filter to remove odors from a room up to 40’ x 40’ The LA2000-OC also removes 97% of air borne pollution to .1 microns. This unit is available in black and white. It is made in the USA
LA2000-OC Odor Control
The LA2000-OC features a 5300 square inches of electrostatic filter and a 10 pound activated carbon filter. The OC stands for odor control. These two elements team up to provide superior air filtration. It removes 97% of all indoor air pollution with particles as small as .1 microns. The activated carbon filter removes odors from the air.
The Science behind the Product.
4 filters stages stack up to provide clean fresh air for your business. First we use a MERV 2 pre-filter to remove large particles from the air. This filter is washable and can last up to two years. A particle ionizer adds a charge to particles in the air stream. Aluminum plates trap the charged particles. The clean air moves through the carbon filter where odors are absorbed.
How Carbon works to remove odors
The activated carbon filter in the LakeAir LA2000-OC removes many unwanted smells and VOCs from the air. Activated carbon is a sorbent . It actually absorbs the harmful gasses. Each granule of carbon has a large surface area. This allows fumes to be absorbed. Activated carbon provides a huge amount of filtration. We use a blend high grade carbons to provide superior odor control. You need replace the carbon filter after it has absorbed all the odor it can. You cannot wash a carbon filter and reuse it.
- Volume 1200 CFM
- Area 40 x 40 room
- Efficiency 97% to .1 micron
- Filtration Electrostatic Precipitator
- Odor Control High Grade Activated Carbon
- Weight 83 pounds
- Current 115 V / 6.7 amp | 230 V / 2.4 amp
- Mount Ceiling Hung / Wall / Cart
- Sound 55 / 65 db(A)
- Size 21.5″ x 20.5″ x 19″
Replacement Carbon Filter
- Part Number 499025
- Weight 10.3 pounds
- Price $240.00 (free shipping)
Convert Your Existing LA2000-S
You can easily convert your existing LA2000-S. Simply remove the right electrostatic cell (part# 101215). Disconnect the high voltage wire from the right side cell contact block. Tape the connector with electricians tape to avoid arcing. Insert the Ultra Carbon filter (499025) .