Menu

Mold Magnet

$24.95

Mold Magnet is a patented bio-molecular formulation that increases the capture of unhealthful mold, bacteria and virus microbes on  air filters. Each 8 oz bottle will treat more than 10 filters. This Link for Case Lots

Description

Mold Magnet - LakeAir

Product Features

  • Innovative all-natural biological formulation (U.S. Patented)
  • Works on standard (fiber and paper) HVAC and furnace filters and other filters such as car filters and room air filters
  • Independently tested and proven for extreme germ capture
  • Helps alleviate allergy symptoms
  • Lasts the full life of the furnace filter
  • Safe for your family and pets
  • Restores indoor air quality
  • Helps to capture spores, bacteria, viruses and allergens
  • 100% biodegradable

Notice About Using Mold Magnet on Surgical Masks

We have had several inquiries as to whether Mold Magnet would be appropriate for use on N95 or surgical masks for more effective capturing of the Coronovirus. This seems like an ideal use for the product, however, Mold Magnet has not been safety tested for such an application and there might be some limited concern about extended close skin contact of Mold Magnet for sensitive individuals.  Therefore, we do not recommend the use of Mold Magnet on masks at this time.     

Mold Magnet Description

Mold magnet is a convenient spray designed to treat furnace filters. Each bottle will treat (8) 24″ x 24″ media filters. This should be enough for 1-3 years of filter changes. It Increases capture of mold, bacteria, viral particles and other allergens. This prevents them from spreading throughout the air vents. Mold Magnet captures nearly 1,000x more mold spores, bacteria and virus particles than untreated filters in independent testing.  The product keeps working for the full life of the filter. Microbes preferentially stick to the bio-molecules contained in the MOLD MAGNET spray.

How does Mold Magnet work? Watch this short animation below illustrating how Mold Magnet-treated furnace filters are supercharged to capture bacteria, mold spores and viral particles that normally would pass right through a typical untreated filter. Why allow microbes into your home? You don’t have to with Healthful Home Mold Magnet Filter Enhancement spray.

Additional Information and Uses

MOLD MAGNET® is a patent-pending bio-molecular formulation that increases the capture of unhealthful microbes in your standard HVAC furnace filters and other filters. Each 8-oz. bottle will treat up to a year’s worth of filters.

MOLD MAGNET® increases the effective filter rating of standard HVAC filters 7 levels (reference MERV furnace filter rating chart), with potential savings of $40 or more on each treated filter.

Laboratory Tested by NIOSH/CDC to efficiently capture both bacterial and viral particles. Long-lasting effectiveness keeps working until the filter is replaced. Does not decrease expected filter life. Microbes preferentially stick to the bio-molecules applied to the filter.

Directions:  Holding the bottle 10-12 inches away from the filter surface, spray on all filters surfaces. Please avoid over spray. most filters require 9 good spray pumps. Allow electrostatic filters to dry, other filters may be put into use right away. Charged media filters may be discarded normally, Electrostatic filters can be wash normally.

Commercial & Bulk Purchases: Mold Magnet can now be purchases in commercial strength and larger volume containers from the National  Commercial Distributor. The Commercial product is known as IAQ-Pro-FE. For more information visit IAQ-Pro.com

Product Specifications

Product Uses

  • Furnace filters
  • Auto/RV filters
  • Room air purifiers
  • Window air conditioners
  • Vacuums

Visual Evidence of Mold Magnet Effectiveness

Here are side by side photos showing filters with and without Mold Magnet

Mold Magnet Side by Side Comparison

For Extreme Germ Capture, Use MOLD MAGNET® On Furnace Filters: Captures Up To 1000x More Microbes!

 Nano-sized (virus-sized) particles were effectively captured in standard filters treated with MOLD MAGNET® that typically were only rated for particles of 10 microns or greater. This increased capture rate means that with MOLD MAGNET® you can achieve the same filtration efficiencies found only in much more expensive filters (rated MERV 13 or higher) while using lower cost standard filters (MERV 8 or lower).

MOLD MAGNET® Furnace Filter Enhancer is laboratory-proven to improve your HVAC & Furnace filter capture rate for biological microbes in your home or office. Field-tested to demonstrate increased capture of molds, bacteria and viral particles up to 1000x more effectively than untreated filters

Graph showing comparative effectiveness of Mold Magnet

The Savings Can Add Up To Hundred Of Dollars Per Bottle

Each bottle will treat at least a year’s worth of standard-sized filters (12 or more), translating to a potential savings of hundreds of dollars per bottle. Even better, because you are using lower-rated MERV filters when using MOLD MAGNET® Furnace Filter Enhancer, the decreased back pressure on your HVAC system means less strain on your blower and less potential maintenance.

Reduce Allergy Symptoms

Virus being trapped

Anyone suffering from allergies or sensitivities to microbial contamination in their HVAC systems should consider trying MOLD MAGNET on their filters. Why pay for those expensive High-MERV rated filters if you don’t have to? NOT a tacifier. Does not decrease the life of your filter. Guaranteed satisfaction or your money back. No questions asked. Just give it a try and if you don’t feel an improved air quality immediately, just contact Healthful Home for a full refund. What do you have to lose?

Contents are all-natural and non-toxic. Simply spray your filter on both sides and place into the HVAC or furnace immediately.

Additional information

Weight 1 lbs
Dimensions 9 × 6 × 2 in
Bottle

8 oz Bottle

Reviews

There are no reviews yet.

Be the first to review “Mold Magnet”

Your email address will not be published. Required fields are marked *