Description
High Performance Smoke Eater
The WM2-RC2-S Smoke Guard is a 1500 CFM Air Purifier / Smoke Eater . The variable speed controller can be mounted in the unit or can be mounted into a wall switch in another location. The electrostatic model has a pre-filter, electrostatic cell and 2 chamber carbon filter to remove odors and gasses.
The electrostatic cell removes 97% of all dirt and smoke from the air to a size of 0.1 micron. When operated with the carbon filter in place there is zero Ozone emission. The electronic filter removes easily and is washable. This saves you hundreds of dollars every year in comparison to replacing HEPA or Media filters.
The other two filters add to the performance of the Smoke Guard. The pre filter is a MERV 2 filter and removes the largest of particle from the air. This filter is washable and will last more than a year. The final filter in the WM-RC2-S is a 2 chamber carbon filter. This filter contains 2 .5 pounds of activated carbon. The air is drawn directly through the carbon for maximum odor removal.
The Smoke Eater that Fits Your Shop
Finally an Air Purifier / Smoke Eater you can mount flush to the wall. The Smoke Guard is designed to mount on wall studs set at 24 inch on center. A mounting box will allow the unit to be set into a wall with 16 inch center studs. This unit is only 11 inches deep, so only 6.5 inches extend into the adjacent space or outside if desired.
The Smoke Guard ships with a trim kit to help finish of the look of the unit. It is meant to be a part of the room décor rather than just a smoke eater. Customizing the trim to better match your shop should be simple by matching the trim already in the room. Take your air purification to the next level. So many cigar shops air purification looks like an after thought. Some big box mounted on the ceiling. The Smoke Guard will change all of that
The Smoke Eater that Builds Your Brand
The Smoke Guard is designed to allow the addition of your business logo or brand right into the unit. There is an area 16″ x 4.25 inches for your custom art work. For a small engineering fee we will take your logo or brand and make it laser friendly. Almost all logos need alteration. Some might well be impossible to copy closely, but we will work with you to find the laser art to make your smoke guard compliment and help build your brand.
| WM-RC2-S Smoke Guard Specifications | ||
| Capacity | 1500 CFM | |
| Filter 1 | MERV 2 Pre Filter | |
| Filter 2 | 20 x 16 x 5 Electrostatic Cell 97% Efficient | |
| Filter 3 | 2 Chamber Carbon Filter | |
| Unit Size | 33″ x 24″ x 11″ | |
| Unit Weight | 70 Lbs. | |
| Power | 120 volt @ 3 amps | |
| Sound | 40-69 d(b)A @ 15 feet | |
| Warranty | 7 year Limited | |
| note | Does not meet California air cleaner regulation requirements: cannot be shipped to California | |
Reviews
There are no reviews yet.