LAD1814 Whole House Electrostatic Air Purifier
The LAD1814 is commonly referred to as “whole house filtration system”. The LAD will remove mold, pollen, pet dander, dust and many other allergens. If you keep the carbon after filter changed regularly you will remove formaldehyde and radon from your entire home.
The LAD1814 is a “whole house air filtration system”. The LAD has a capacity of 400 to 1400 cfm. This unit fits in-duct, normally next to the furnace blower. The LAD1814 joins to duct work that has an opening of roughly 18″ x 14″. The system filter is a electrostatic cell with over 13,000 square inches of filtering surface. This electrostatic filter is powered by a power pack that puts out 8K DC Volts at low amperage. This low amperage results in very low ozone emission as a result of the purification process. A Canadian study found that electrostatic whole house air filtration systems provided the best improvement in indoor air quality with the 2nd lowest cost of maintenance.
Economical, Safe Long Term Service
The LAD1814 whole house air filtration system uses just 42 watts of electricity to clean the air in your entire home. If you ran the air purifier 24 hours a day 365 days a year it would cost you about$45.00 for the entire year. The free flow design allows our furnace and HVAC fan to run easier using less electricity as well. The LAD1814 has several safety feature like a grounding strap and safety micro switch. The LAD1814 emits about .0048 ppm of ozone which is below the level accepted by the State of California. All LakeAir models have a history of long service. It is not uncommon for us to receive messages from customers who have had an 1814 for more than 20 years. The LAD Power Pack which is the brain of the system has an unbeatable 7 year warranty.
Easy Mounting and Installation
LakeAir whole house air filtration systems are ideal for homes and small business applications. These top of the line units are designed and sized to be compatible with most furnace and air conditioning systems on the market, especially the newer high-efficiency models. They are easily mounted in any position on any forced air system and can be sized to a variety of duct openings. They install easily due to less duct work transition and easy bend-over crimping tabs for fast installation without the use of fasteners.
- capacity 400- 1400 cfm
- unit size 21.5″ x 6.75″ x16.75″
- duct opening (inlet and outlet) 18″ x 14.5″
- power pack dimensions: 8.25″ x 5.5″ x 3.25″
- unit weight: 28 lbs.
- particle removal: 97% of airborne particles as small as .01 microns
- system cfm 600/1000/1400
- cooling tons 1.5 / 2.5 / 3.5
- BTU x 1000 60 /100 /140
- shipping weight: 36 lbs.
- activated carbon after filter
- washable permanent electronic filter cell
- 7 Year Limited Warranty